How to Remove Paint From Metal Without Chemicals

How to remove paint from metal? Many owners of old homes are disappointed to find out that someone painted over beautiful metal components at one time. Figuring out how to remove paint from metal doesn’t have to be complicated or expensive. In fact, an incredibly effective paint remover for metal is boiling water. This technique is best for removing old paint from items like hardware, hinges, knobs, etc, and is likely the fastest, easiest, and cheapest option if done correctly.

How to remove paint from metal

How to Remove Paint From Metal Without Chemicals 2

How to remove paint from metal without chemicals?

You won’t need many supplies to complete this project. You need:

– Metal scrapper or putty knife
– Disposable aluminum tray
– Lint-free cloth
– Boiling water

The first step is to bring water to a boil. Once you get a rolling boil, carefully and slowly pour the boiling water over the hardware. If using a tin, make sure you have it doubled up and resting on something that won’t get damaged by heat.

How to Remove Paint From Metal Without Chemicals 3

How to remove paint from metal without chemicals?

If you opt to use a crockpot, turn it on high and let the hardware soak for 5 to 10 minutes. If you have your metal in a pot, simmer for the same amount of time. Most painted items won’t need to sit this long unless there are a lot of layers or crevices where the paint is more stubborn.

How to Remove Paint From Metal Without Chemicals 4

How to remove paint from metal without chemicals?

In most cases, the metal is going to be tarnished underneath all that paint. Use a lint free cloth to buff off as much dirt, junk, and tarnish as possible. If you still have paint stuck in hard-to-reach spots, go back to step one and do the process over again.

After all the paint has been removed, it’s up to you to decide how you want to clean the metal. Some might want to leave the old metal components tarnished and darkened with age. A third option is to remove some but not all of the tarnish. This way, the items will still look old, but not quite as old. Consider leaving tarnish in recessed sections of the hardware by opting to polish only the raised sections.

Comments (No)

Leave a Reply